Brad's Car Manuals: A 3rd party mirror of CHARM + LEMON car manuals
Home >> Kia >> 2020 >> Rio LX >> Repair and Diagnosis >> Transmission >> Transmission Control Systems >> IVT Control System >> Driven Pulley Speed Sensor >> Repair Procedures >> Removal

Repair Procedures: Removal

Download the full database via torrent (~1.1 TB)  |  Download Brad's custom LEMON patches
  1. Remove the battery and battery tray.

    (Refer to Engine Electrical System - "BATTERY ")

  2. Disconnect the driven pulley speed sensor connector (A).
    G13412490Courtesy of KIA MOTORS AMERICA, INC.
  3. Remove the driven pulley speed sensor (A) after loosening the bolt.

    Tightening torque: 

    9.8 - 14.7 N.m (1.0 - 1.5 kgf.m, 7.2 - 10.8 lb.ft)

    G13412491Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About Brad's Car Manuals