Repair Procedures: Inspection
WARNING: This page is about a different car, the 2024 Kia Forte. However, it is still accessible from the selected car via links, so may be relevant.
Information
Inspect the connector thoroughly for looseness, poor connection, bending, corrosion, contamination, deformation, or damage.
- Disconnect the parking switch connector.
- Turn Ignition "ON", & engine "OFF".
- Measure the output signal in each range (P, R, N, D).
SIGNAL CODE SPECIFICATION
| Signal | P | R | N | D |
|---|---|---|---|---|
| S1 | 18.3% | 47.5 % | 64.6 % | 81.7 % |
| S2 | 81.7 % | 52.5 % | 35.4 % | 18.3% |
PIN - CONNECTION SPECIFICATION
| Pin | Connection information |
|---|---|
| 1 | Power (Ps, Ns) |
| 2 | Back-up lamp |
| 3 | Power (Back-up lamp) |
| 4 | Ps, Ns |
| 5 | Power (5V) |
| 6 | Ground (5V) |
| 7 | S1 |
| 8 | S2 |