Brad's Car Manuals: A 3rd party mirror of CHARM + LEMON car manuals
Home >> Kia >> 2022 >> Forte GT, Standard Trans >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System - 1.6L >> RCV Control Solenoid Valve >> Repair Procedures >> Removal And Installation

Removal And Installation

Download the full database via torrent (~1.1 TB)  |  Download Brad's custom LEMON patches
  1. Turn the ignition switch OFF and disconnect the battery negative (-) terminal.
  2. Remove the air duct.
  3. Disconnect the RCV control solenoid valve connector (A) and vapor hoses (B).
  4. Remove the RCV control solenoid valve (C) after loosening the mounting bolt.

    RCV control solenoid valve bracket mounting bolt: 

    9.8 - 11.8 Nm (1.0 - 1.2 kgf.m, 7.2 - 8.7 lb.ft)

    G14560922Courtesy of KIA MOTORS AMERICA, INC.
  5. Install in the reverse order of removal.
NOTE:
  • If the RCV is dropped, it may cause internal damage. (Do not reuse)
  • Be careful not to get foreign matters into the valve hole.