Brad's Car Manuals: A 3rd party mirror of CHARM + LEMON car manuals
Home >> Land Rover >> 1990 >> Range Rover Base >> Repair and Diagnosis >> Brakes >> Traction Control >> Anti-Lock >> System Testing >> Multi-Meter Check Procedure

Multi-Meter Check Procedure

Download the full database via torrent (~1.1 TB)  |  Download Brad's custom LEMON patches
CAUTION: Ensure multi-meter is correctly set to volts or ohms, dependent on which test is being carried out. Ensure ignition is switched ON or OFF as test requires.
  1. Disconnect 35-pin connector from ECU, connect adaptor plug. Commence check at appropriate pin on 35-pin on wiring harness.
  2. Check harness wires for continuity, check fuses and relays.
  3. Test related components.
  4. If intermittent contact is suspected, attempt to locate fault by flexing harness and cables or moving contacts.
scientia non olet · About Brad's Car Manuals