Test No. 5, Power Window Master Switch Circuit
Remove master switch. Check for continuity between specified terminals of master switch. See Fig 1. See MASTER SWITCH TEST table. If continuity is not as specified, replace master switch. If continuity is as specified, repair or replace wiring harness between power window master switch and driver's door ECU.
MASTER SWITCH TEST
| Window Switch | Terminals No. | |||
|---|---|---|---|---|
| Driver's Switch | ||||
| Off (Neutral) | (1) | |||
| Up Auto | 3, 5 & 10 | |||
| Up Auto | 3 & 10 | |||
| Down | 5, 9 & 10 | |||
|
||||