Shift Lock Control Switch

Download the full database via torrent (~1.1 TB)

Disconnect electrical connector from shift lock control switch. Using ohmmeter, check continuity between specified terminals in relation to shift lever. See WIRING DIAGRAMS . See SHIFT LOCK CONTROL SWITCH CONTINUITY table. Replace switch if continuity is not as specified.

NOTE: Continuity must be checked in accordance with position of release button on shift lever and shift lever position.

SHIFT LOCK CONTROL SWITCH CONTINUITY

Shift Lever Position & Condition	Terminals
Any Other Gear Except Park	P & P2
Park & Release Button Not Pushed	P & P1
Park & Release Button Is Pushed	P & P1 Or P & P2