Master Switch
Remove master switch. Check for continuity between specified terminals of master switch. See Fig 1. See MASTER SWITCH CONTINUITY TEST table. If continuity is not as specified, replace master switch.
MASTER SWITCH CONTINUITY TEST
| Position | Terminals No. | |||
|---|---|---|---|---|
| Driver's Switch | ||||
| Off (Neutral) | (1) | |||
| Up Auto | 4, 5 & 10 | |||
| Up | 4 & 10 | |||
| Down Auto | 5, 10 & 12 | |||
| Down | 10 & 12 | |||
| Right Front Switch | ||||
| Off (Neutral) | (1) | |||
| Up Auto | 3, 5 & 10 | |||
| Up | 3 & 10 | |||
| Down Auto | 5, 9 & 10 | |||
| Down | 9 & 10 | |||
| Left Rear Switch | ||||
| Off (Neutral) | (1) | |||
| Up Auto | 1, 5 & 10 | |||
| Up | 1 & 10 | |||
| Down Auto | 5, 7 & 10 | |||
| Down | 7 & 10 | |||
| Right Rear Switch | ||||
| Off (Neutral) | (1) | |||
| Up Auto | 2, 5 & 10 | |||
| Up | 2 & 10 | |||
| Down Auto | 5, 8 & 10 | |||
| Down | 8 & 10 | |||
|
||||