Brad's Car Manuals: A 3rd party mirror of CHARM + LEMON car manuals
Home >> Lexus >> 2005 >> LS 430 >> Repair and Diagnosis >> Suspension >> Suspension Control Systems >> Suspension Control System >> Height Control Compressor ASSY >> Replacement

Height Control Compressor ASSY: Replacement

Download the full database via torrent (~1.1 TB)
  1. REMOVE FRONT WHEELS 
  2. REMOVE FRONT FENDER LINER LH 
  3. REMOVE HEIGHT CONTROL DRYER ASSY 
    1. Disconnect the connector.
    2. Disconnect the air tube (see PRECAUTION  ).
    3. Remove the 3 bolts, nut and height control compressor assy and height control dryer assy.
      Fig 1: Removing 3 Bolts, Nut And Height Control Compressor Assy And Height Control Dryer Assy
      G03000207Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    4. Remove the bolt and height control dryer assy.
    5. Remove the O-ring.
      Fig 2: Removing Bolt And Height Control Dryer Assy
      G03000208Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  4. REMOVE HEIGHT CONTROL COMPRESSOR ASSY 
    1. Remove the 3 bolts, bushing and bracket from height control compressor assy.
      Fig 3: Removing 3 Bolts, Bushing And Bracket From Height Control Compressor Assy
      G03000209Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  5. INSTALL HEIGHT CONTROL COMPRESSOR ASSY 
    1. Install the bracket and bushing with 3 bolts to height control compressor assy.
      1. Torque: 5.9 N.m (60 kgf.cm, 52 in.lbf) 
  6. INSTALL HEIGHT CONTROL DRYER ASSY 
    1. Coat the O-ring with MP grease and install it to height control dryer assy.
      Fig 4: Installing Bracket And Bushing With 3 Bolts To Height Control Compressor Assy
      G03000210Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Install the height control dryer assy with a bolt.
      1. Torque: 6.4 N.m (65 kgf.cm, 56 in.lbf) 
      Fig 5: Installing Height Control Dryer Assy With A Bolt
      G03000211Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    3. Install the height control compressor assy and height control dryer assy with 3 bolts and nut.
      1. Torque: 19 N.m (195 kgf.cm, 14 ft lbf) 
    4. Connect the air tube (see PRECAUTION  ).
    5. Connect the connector.
      Fig 6: Installing Height Control Compressor Assy And Height Control Dryer Assy With 3 Bolts And Nut
      G03000212Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  7. INSTALL FRONT FENDER LINER LH 
  8. INSTALL FRONT WHEELS 
    1. Torque: 103 N.m (1,050 kgf.cm, 76 ft.lbf) 
  9. INSPECT AIR LEAK (SEE  ON-VEHICLE INSPECTION   ) 
scientia non olet · About Brad's Car Manuals