Brad's Car Manuals: A 3rd party mirror of CHARM + LEMON car manuals
Home >> Lexus >> 2007 >> GS 430 >> Repair and Diagnosis >> Engine Performance >> Engine Control System (3UZ-FE) >> Accelerator Pedal >> Removal

Accelerator Pedal: Removal

Download the full database via torrent (~1.1 TB)  |  Download Brad's custom LEMON patches
  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL 
    CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.
  2. REMOVE ACCELERATOR PEDAL 
    1. Disconnect the accelerator pedal position sensor connector.
    2. Remove the 2 bolts and accelerator pedal.
      NOTE:
      • Do not drop or strike the accelerator pedal.
      • Do not disassemble the accelerator pedal.
      Fig 1: Locating Bolts And Accelerator Pedal
      G05285824Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About Brad's Car Manuals