DTC Check / Clear

Download the full database via torrent (~1.1 TB)

CHECK DTC
1. Connect the intelligent tester (with CAN VIM) or Techstream to the DLC3.
2. Turn the engine switch on (IG).
3. Turn the tester on.
4. Enter the following menus:
  1. Intelligent tester - Select: DIAGNOSIS / OBD / MOBD / (desired system) / DTC INFO /
  2. Techstream - Select: Body Electrical / (desired system) / Trouble Codes /
5. Read the DTCs by following the directions on the tester's screen.
  HINT:
  
  Refer to the intelligent tester or Techstream operator's manual for further details.
CLEAR DTC
1. Connect the intelligent tester (with CAN VIM) or Techstream to the DLC3.
2. Turn the engine switch on (IG).
3. Turn the tester on.
4. Enter the following menus:
  1. Intelligent tester - Select: DIAGNOSIS / OBD / MOBD / (desired system) / DTC INFO /
  2. Techstream - Select: Body Electrical / (desired system) / Trouble Codes /
5. Erase the DTCs by following the directions on the tester's screen.
  HINT:
  
  Refer to the intelligent tester or Techstream operator's manual for further details.