Oil Level Sensor: Inspection

Download the full database via torrent (~1.1 TB) | Download Brad's custom LEMON patches

INSPECT ENGINE OIL LEVEL SENSOR

Partially immerse the sensor in an oil bath and warm up the oil bath.

Measure the resistance according to the value(s) in the table below.

Standard resistance

TESTER CONNECTION AND SPECIFIED CONDITION

Tester Connection	Condition	Specified Condition
1 - 2	ON, 20°C (68°F)	Below 1 Ω
	OFF, 20°C (68°F)	Below 1 Ω
	ON, 60°C (140°F)	Below 1 Ω
	OFF, 60°C (140°F)	10 kΩ or higher

Fig 1: Measuring Resistance Between Engine Oil Level Sensor Terminals

G04948263

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

If the result is not as specified, replace the sensor.