Brad's Car Manuals: A 3rd party mirror of CHARM + LEMON car manuals
Home >> Lexus >> 2007 >> SC 430 >> Repair and Diagnosis (Single Page) >> Engine Performance >> Ignition System >> Ignition >> Ignition Coil >> Installation

Ignition Coil: Installation

Download the full database via torrent (~1.1 TB)  |  Download Brad's custom LEMON patches
  1. INSTALL IGNITION COIL ASSEMBLY 
    1. Connect the ignition coil to the spark plug, attach the ignition coil to the cylinder head cover, and install the bolt.

      Torque: 7.5 N*m (76 kgf*cm, 66 in.*lbf) 

    2. Connect the ignition coil connector.
  2. INSTALL INTAKE AIR CONNECTOR PIPE (See  INSTALLATION  ) 
    Fig 1: Locating Ignition Coil Connector
    G05289426Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  3. INSTALL V-BANK COVER (See  INSTALLATION  ) 
  4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL 
  5. PERFORM INITIALIZATION 
    1. Perform initialization (see INITIALIZATION ).
      NOTE: Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.
scientia non olet · About Brad's Car Manuals