Crankshaft Position Sensor: Inspection

Download the full database via torrent (~1.1 TB) | Download Brad's custom LEMON patches

INSPECT CRANKSHAFT POSITION SENSOR

Using an ohmmeter, measure the resistance between the terminals.

Standard Resistance

TERMINALS RESISTANCE CHART

Condition	Specified Condition
Cold	1,630 to 2,740 Ω
Hot	2,065 to 3,225 Ω

Fig 1: Identifying Crankshaft Position Sensor Connector Terminals

NOTE: The terms "cold" and "hot" refer to the temperature of the coils. "Cold" means approximately -10 to 50°C (14 to 122°F). "Hot" means approximately 50 to 100C (122 to 212°F).

If the resistance is not as specified, replace the sensor.