Park/Neutral Position Switch: Inspection
- INSPECT PARK/NEUTRAL POSITION SWITCH ASSEMBLY
- Jack up the vehicle.
- Disconnect the park/neutral position switch connector.
- Measure resistance according to the value(s) in the table below when the shift lever is moved to each position.
Standard resistance
RESISTANCE REFERENCEShift Position Tester Connection Specified Condition P 2 - 6 and 4 - 5 Below 1 Ω Except P ↑ 10 kΩ or higher R 1 - 2 Below 1 Ω Except R ↑ 10 kΩ or higher N 2 - 9 and 4 - 5 Below 1 Ω Except N ↑ 10 kΩ or higher D and 4 2 - 7 Below 1 Ω Except D and 4 ↑ 10 kΩ or higher 3 2 - 3 Below 1 Ω Except 3 ↑ 10 kΩ or higher 2 and L 2 - 8 Below 1 Ω Except 2 and L ↑ 10 kΩ or higher