Brad's Car Manuals: A 3rd party mirror of CHARM + LEMON car manuals
Home >> Lexus >> 2008 >> IS F >> Repair and Diagnosis (Single Page) >> Engine Performance >> Engine Control Systems >> Engine Control System - System & Component Testing, R & I >> Engine Oil Temperature Sensor >> Inspection

Engine Oil Temperature Sensor: Inspection

Download the full database via torrent (~1.1 TB)  |  Download Brad's custom LEMON patches
  1. INSPECT OIL TEMPERATURE SENSOR 
    1. Measure the resistance according to the value(s) in the table below.

      Standard Resistance 

      TESTER CONNECTION SPECIFIED CONDITION CHART

      Tester Connection Condition Specified Condition
      1 - 2 25°C (77°F) 8.70 to 11.30 kΩ
      1 - 2 80°C (176°F) 1.529 to 1.869 kΩ
      Fig 1: Inspecting Oil Temperature Sensor
      G05751971Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

      If the result is not as specified, replace the sensor

      NOTE: When checking the sensor in water, keep the terminals dry. After the check, wipe the sensor dry.
scientia non olet · About Brad's Car Manuals