Brad's Car Manuals: A 3rd party mirror of CHARM + LEMON car manuals
Home >> Lexus >> 2008 >> LS 600hL >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System - Circuit Tests, Component Removal, Inspection & Installation >> Throttle Body >> Inspection

Throttle Body: Inspection

Download the full database via torrent (~1.1 TB)  |  Download Brad's custom LEMON patches
  1. INSPECT THROTTLE BODY ASSEMBLY 
    1. Check that the throttle valve opens and closes smoothly.
    2. Check that the there is no sludge accumulating around the throttle body
    3. Measure the resistance according to the value (s) in the table below

      Standard resistance 

      STANDARD RESISTANCE

      Tester Connection Condition Specified Condition
      1 (M-) - 2 (M+) 20°C (68°F) 0.3 to 100 Ω
      3 (E2) - 5 (VC) 20°C (68°F) 2.0 to 4.0 kΩ
      Fig 1: Identifying Throttle Body Connector Terminal
      G05771222Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

      If the result is not as specified, replace the throttle body assembly.