VVT Sensor: Inspection

INSPECT VVT SENSOR

Using an ohmmeter, measure the resistance according to the value(s) in the table below.

Standard resistance

TERMINALS RESISTANCE REFERENCE

Condition	Specified Condition
Cold	835 to 1,400 Ω
Hot	1,060 to 1,645 Ω

Fig 1: Identifying Terminals Of VVT Sensor Connector

NOTE:

"Cold" and "Hot" mean the temperature of the coils themselves.
"Cold" is from -10°C (14°F) to 50°C (122°F) and "Hot" is from 50°C (122°F) to 100°C (212°F).

If the resistance is not as specified, replace the sensor.