Brad's Car Manuals: A 3rd party mirror of CHARM + LEMON car manuals
Home >> Lexus >> 2008 >> SC 430 >> Repair and Diagnosis >> External Pages >> Different car >> Section 46 (Navigation) >> Navigation System >> Touch Panel Switch does not Function >> Inspection Procedure

Inspection Procedure

Download the full database via torrent (~1.1 TB)  |  Download Brad's custom LEMON patches
WARNING: This page is about a different car, the 2007 Lexus SC 430. However, it is still accessible from the selected car via links, so may be relevant.
  1. CHECK TOUCH PANEL 
    1. Check for foreign matter on the display.

      OK: 

      The display is clean. 

    NG: CLEAN THE DISPLAY AND RECHECK TOUCH PANEL 

    OK: Go to next step 

  2. CHECK TOUCH SWITCH (DISPLAY CHECK MODE) 
    1. Enter the Display Check mode's Touch Switch Check (see DISPLAY CHECK MODE  ).
      Fig 1: Diagnostic Tool Display - Touch Switch Check
      G05293265Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Touch the display in the area where the abnormal switch occurs.

      OK: 

      A "+" mark appears at the touched position. 

    NG: PROCEED TO NEXT CIRCUIT INSPECTION SHOWN IN PROBLEM SYMPTOMS TABLE 

    OK: REPLACE MULTI-DISPLAY