Brad's Car Manuals: A 3rd party mirror of CHARM + LEMON car manuals
Home >> Lexus >> 2009 >> IS F >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control (Service Information) >> Heated Oxygen Sensor >> On-Vehicle Inspection >> On-Vehicle Inspection

On-Vehicle Inspection

Download the full database via torrent (~1.1 TB)  |  Download Brad's custom LEMON patches
  1. INSPECT HEATED OXYGEN SENSOR 
    Fig 1: Identifying Heated Oxygen Sensor Connector
    GTY126798Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    1. Disconnect the heated oxygen sensor connector.
    2. Measure the resistance according to the value(s) in the table below.

      Standard Resistance

      Tester Connection Condition Specified Condition
      1 (HT) and 2 (+B) 20°C (68°F) 11 to 16 Ω

      If the result is not as specified, replace the sensor.

scientia non olet · About Brad's Car Manuals