Fuel Pressure Sensor: Inspection
- INSPECT FUEL PRESSURE SENSOR
- Check the fuel pressure sensor output voltage.
- Measure the voltage according to the value(s) in the table below.
Standard voltage
STANDARD VOLTAGETester Connection Condition Specified Condition 2 (PR) - 3 (E2) Apply 5 V between terminals 1 (VC) and 3 (E2) Approximately 0.5 V If the result is not as specified, replace the fuel pressure sensor.
HINT:
The above voltage is output when pressure is not applied (0 kPa (0 kgf/cm2 , 0 psi)) to the sensor.
- Measure the voltage according to the value(s) in the table below.
- Check the fuel pressure sensor output voltage.