Brad's Car Manuals: A 3rd party mirror of CHARM + LEMON car manuals
Home >> Lexus >> 2009 >> LS 460L AWD >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System - System Testing; Component Inspection, Removal & Installation >> Crankshaft Position Sensor >> On-Vehicle Inspection

On-Vehicle Inspection

Download the full database via torrent (~1.1 TB)  |  Download Brad's custom LEMON patches
  1. CHECK CRANKSHAFT POSITION SENSOR OUTPUT VOLTAGE 
    Fig 1: Identifying Crankshaft Position Sensor Connector
    G06190200Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    1. Turn the engine switch on (IG).
    2. Measure the voltage according to the value (s) in the table below.

      Standard voltage 

      STANDARD VOLTAGE SPECIFICATION

      Tester Connection Switch Condition Specified Condition
      E1-18 (VC) - E1-34 (NE-) Engine switch on (IG) 5V
    3. While turning the crankshaft pulley by hand, measure the voltage between each terminal. Check that the voltage changes between the Hi range and Lo range shown in the table below.

      Standard voltage 

      STANDARD VOLTAGE SPECIFICATION

      Tester Connection Switch Condition Specified Condition
      E1-27 (NE+) - E1-34 (NE-) Engine switch on (IG) 3.75 to 4.50 V (Voltage (Hi))
      0.50 to 1.25 V (Voltage (Lo))