Brad's Car Manuals: A 3rd party mirror of CHARM + LEMON car manuals
Home >> Lincoln >> 1995 >> Mark VIII Base >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - System/Component Tests 4.6L >> Introduction >> Variable Induction Systems >> Intake Air Control Solenoid

Intake Air Control Solenoid

Download the full database via torrent (~1.1 TB)

With engine off, wait 10 seconds, and then disconnect Intake Air Control (IAC) solenoid. Solenoid is mounted on firewall side of intake plenum. Using an ohmmeter on 200-ohm scale, check resistance between IAC solenoid terminals. Resistance should be 50-100 ohms. If resistance is not as specified, replace solenoid.

scientia non olet · About Brad's Car Manuals