Brad's Car Manuals: A 3rd party mirror of CHARM + LEMON car manuals
Home >> Lincoln >> 2000 >> LS V8-3.9L VIN A >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Engine Temperature Sensor >> Service and Repair

Engine Temperature Sensor: Service and Repair

Download the full database via torrent (~1.1 TB)  |  Download Brad's custom LEMON patches
REMOVAL
1. Remove the intake manifold. Refer to Engine.







2. Disconnect the Cylinder Head Temperature (CHT) sensor electrical connector.







3. Remove and discard the CHT sensor.

INSTALLATION
1. To install, reverse the removal procedure.

CAUTION: The tip of the CHT sensor must contact the cylinder head at the bottom of the hole. When removed, it will be slightly crushed. This is a normal condition.

NOTE: 3.9L CHT sensors are not to be reused. Always install a new sensor.