Gasoline Engines: Villager

Download the full database via torrent (~1.1 TB) | Download Brad's custom LEMON patches

Connect scan tool to DLC. Turn ignition on. Using scan tool, enter correct year, make, and model. Using DVOM, measure TP sensor voltage with throttle valve completely closed. Loosen TP sensor screws. Adjust TP sensor so voltage is 0.3-0.7 volt. Tighten TP sensor screws. Using scan tool, ensure IDLE SW PID reads ON. Start engine and warm to normal operating temperature. Turn ignition off. Turn ignition on for 5 seconds and then off for 5 seconds. Repeat 20 times.