Brad's Car Manuals: A 3rd party mirror of CHARM + LEMON car manuals
Home >> Lincoln >> 2006 >> LS >> Repair and Diagnosis >> Engine Performance >> Engine Ignition System >> Removal And Installation >> Ignition Coil-On-Plug >> Removal

Ignition Coil-On-Plug: Removal

Download the full database via torrent (~1.1 TB)

    LH ignition coils 

  1. Remove the evaporative emissions (EVAP) canister purge valve nuts and position the valve and bracket aside.

    2. All ignition coils 

  2. Remove the 12 bolts and the 2 ignition coil covers.
  3. Remove all silicone sealant and residue from the coil cover.
    Fig 1: Locating Silicone Sealant And Residue
    G04691037Courtesy of FORD MOTOR CO.
  4. Remove all silicone sealant and residue from the valve cover surface and ignition coil wiring harness.
    Fig 2: Locating Ignition Coil Wiring Harness
    G04691038Courtesy of FORD MOTOR CO.
  5. Disconnect the 8 ignition coil electrical connectors.
  6. Remove the 8 ignition coil bolts.
    7. NOTE: When removing the ignition coils, a slight twisting motion will break the seal and ease removal.
  7. Remove the 8 ignition coils.
scientia non olet · About Brad's Car Manuals