Brad's Car Manuals: A 3rd party mirror of CHARM + LEMON car manuals
Home >> Lincoln >> 2008 >> Navigator 4WD >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Electronic Engine Control System >> Removal And Installation >> Powertrain Control Module (PCM) >> Removal And Installation

Removal And Installation

Download the full database via torrent (~1.1 TB)  |  Download Brad's custom LEMON patches
  1. Retrieve the module configuration. Carry out the module configuration retrieval steps of the Programmable Module Installation procedure. For additional information, refer to MODULE CONFIGURATION article.
  2. Disconnect the battery ground cable. For additional information, refer to BATTERY, MOUNTING AND CABLES article.
  3. Disconnect the 2 PCM electrical connectors.
  4. Remove the 2 bolts and the ground cable.
    • To install, tighten to 7 Nm (62 lb-in).
  5. Remove the PCM.
  6. To install, reverse the removal procedure.
scientia non olet · About Brad's Car Manuals