Brad's Car Manuals: A 3rd party mirror of CHARM + LEMON car manuals
Home >> Mazda >> 1980 >> B2000 Base >> Repair and Diagnosis >> Engine Performance >> Fuel Delivery >> Evaporative Emissions System >> Testing >> Evaporative Line Check

Evaporative Line Check

Download the full database via torrent (~1.1 TB)  |  Download Brad's custom LEMON patches
  1. Disconnect evaporative hose from canister. Connect the detached hose to a "U" tube type pressure gauge.
  2. Gradually apply low air pressure into "U" tube so that difference of water level should be 14" (356 mm).
  3. Then, bind the inlet of the "U" tube and leave bound for 5 minutes. If water drops no more than 1" (25 mm) after 5 minutes, evaporative line is in good condition.
    Fig 1: Testing Evaporative Lines Using "U" Tube Pressure Gauge
    G09310594Courtesy of MAZDA MOTORS CORP.