Brad's Car Manuals: A 3rd party mirror of CHARM + LEMON car manuals
Home >> Mazda >> 1988 >> 323 Base, 2D Hatchback >> Repair and Diagnosis >> Engine Performance >> System >> EGI Control System >> Diagnosis & Testing >> Component Testing >> Neutral Switch (M/T)

Neutral Switch (M/T)

Download the full database via torrent (~1.1 TB)  |  Download Brad's custom LEMON patches
  1. Disconnect 2-pin connector behind battery. Measure resistance between Brown/Black wire and ground. If resistance is zero ohms, use other side of connector.
  2. Place transaxle in neutral position. Resistance between Red/Blue wire and Brown/Black wire should be infinite.
  3. Place transaxle in any gear. Resistance between Red/Blue wire and Brown/Black wire should be zero ohms.
scientia non olet · About Brad's Car Manuals