Brad's Car Manuals: A 3rd party mirror of CHARM + LEMON car manuals
Home >> Mazda >> 1989 >> RX-7 Base, Automatic >> Repair and Diagnosis >> Engine Performance >> System >> System/Component Tests >> Relays, Solenoids, Motors & Modules >> A/C Cut-Out Control System >> Testing

A/C Cut-Out Control System: Testing

Download the full database via torrent (~1.1 TB)  |  Download Brad's custom LEMON patches
  1. Turn A/C, blower and ignition switches on. DO NOT start engine. Shift transmission into a drive gear. Open throttle fully. Listen for A/C clutch disengaging and reengaging after 7 seconds.
  2. If system does not test as indicated, check operations of related switches and relays. See PIN VOLTAGE CHART S and SENSOR RANGE CHARTS article.