Brad's Car Manuals: A 3rd party mirror of CHARM + LEMON car manuals
Home >> Mazda >> 1990 >> 929 Base >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Engine Controls - Remove/Install/Overhaul >> Fuel System >> Carburetor >> Reassembly

Fuel System: Carburetor: Reassembly

Download the full database via torrent (~1.1 TB)  |  Download Brad's custom LEMON patches
  1. To reassemble, reverse disassembly procedure using new gaskets. The "O" ring located on air/fuel solenoid valve must be replaced and coated with gasoline prior to installation.
  2. Check float level and float drop adjustment prior to installing air horn. Perform all adjustments after assembly. See CARBURETOR ADJUSTMENTS in this article. DO NOT install spring pin in front of mixture screw until adjustment has been made with engine running.
scientia non olet · About Brad's Car Manuals