Brad's Car Manuals: A 3rd party mirror of CHARM + LEMON car manuals
Home >> Mazda >> 1990 >> 929 Base >> Repair and Diagnosis >> Steering >> Steering Column >> Removal & Installation >> Combination Switch >> Installation

Combination Switch: Installation

Download the full database via torrent (~1.1 TB)  |  Download Brad's custom LEMON patches
  1. Install combination switch and clockspring assembly. Before installing steering wheel, center clockspring. To center clockspring, set front wheels straight ahead. Turn clockspring connector clockwise until it stops. DO NOT force it.
  2. Return connector 2 3/4 turns (counterclockwise). Rotate clockspring connector further (if necessary) to align marks on connector and outer housing. See Fig 1 .
  3. Install steering wheel. Tighten steering wheel nut to specification. See TORQUE SPECIFICATIONS  table at end of article. Install air bag module. See AIR BAG RESTRAINT SYSTEM article in ACCESSORIES & EQUIPMENT.
Fig 1: Aligning Clockspring Connector Alignment Marks
G90B01255Courtesy of MAZDA MOTORS CORP.
scientia non olet · About Brad's Car Manuals