Combination Switch: Installation
- Install combination switch and clockspring assembly. Before installing steering wheel, center clockspring. To center clockspring, set front wheels in straight-ahead position. Turn clockspring connector clockwise until it stops. DO NOT force clockspring.
- Rotate connector 2 3/4 turns (counterclockwise). Rotate clock-spring connector further (as necessary) to align marks on connector and outer housing. See Fig 1
.
- Install steering wheel. Tighten steering wheel lock nut to specification. See TORQUE SPECIFICATIONS
table. Install air bag module. See AIR BAG RESTRAINT SYSTEM
article in the ACCESSORIES/EQUIPMENT section.
Courtesy of MAZDA MOTORS CORP.