Brad's Car Manuals: A 3rd party mirror of CHARM + LEMON car manuals
Home >> Mazda >> 1994 >> MX-6 Base, Automatic >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - Basic Testing >> Ignition Checks >> Ignition Coil Resistance

Ignition Coil Resistance

Download the full database via torrent (~1.1 TB)
  1. Remove primary and secondary leads from ignition coil. Using ohmmeter, check primary resistance between terminals "A" and "B" of coil. See Fig 1 . Resistance should be as specified in IGNITION COIL RESISTANCE table. If resistance is not as specified, replace ignition coil.
  2. Check secondary resistance between terminal "A" and coil tower. See Fig 1 . See IGNITION COIL RESISTANCE  table. If resistance is not within specification, replace coil.
Fig 1: Checking Coil (MX-6 & 626)
G94A45047Courtesy of MAZDA MOTOR CORP.
IGNITION COIL RESISTANCE

Application Primary Secondary
MX-6 & 626 .58-.86 11,500-18,500
scientia non olet · About Brad's Car Manuals