Component Testing: Sub-Switch

Download the full database via torrent (~1.1 TB)

Check continuity across specified terminals of sub-switch connector with main switch button held in specified position. See SUB-SWITCH CONTINUITY TEST table. SeeFig 1 . Replace sub-switch if continuity is not as specified.

SUB-SWITCH CONTINUITY TEST

Application & Switch Position	Continuity Between Terminals
UP	B & G; F & H
Off (Neutral)	A & B; F & H
DOWN	A & B; F & G

Fig 1: Identifying Sub-Switch Connector Terminals (RX7)

Courtesy of MAZDA MOTORS CORP.