No-Load Test

Download the full database via torrent (~1.1 TB) | Download Brad's custom LEMON patches

Remove starter. Connect fully-charged 12-volt battery, voltmeter and ammeter to starter. See Figure . Using remote starter wires or jumper, engage solenoid. Starter should spin smoothly. Compare readings with specifications. See NO-LOAD TEST SPECIFICATIONS table. If voltage is less than specified or amperage is more than specified, repair or replace as necessary.

NO-LOAD TEST SPECIFICATIONS

Application				Specification
Millenia, MPV, 626
Voltage (Minimum)				11
Amperage (Maximum)				90
Protege
1.5L
Denso Starter
Voltage (Minimum)				11
Amperage (Maximum)				50
Mitsubishi Starter
Voltage (Minimum)				11
Amperage (Maximum)				60
1.8L
Voltage (Minimum)				11
Amperage (Maximum)				90