Brad's Car Manuals: A 3rd party mirror of CHARM + LEMON car manuals
Home >> Mazda >> 1998 >> 626 DX, Automatic >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - Basic Testing >> Ignition Checks >> B2500, B3000 & B4000 >> Spark Check

Spark Check

Download the full database via torrent (~1.1 TB)  |  Download Brad's custom LEMON patches
  1. Remove spark plug. Connect spark plug to high-tension lead and hold about 1/4" from ground. Crank engine and verify a strong Blue spark is discharged. If spark is present at all spark plugs, see CRANKSHAFT POSITION (CKP) SENSOR.
  2. If no spark is present at all plugs, see NO START (NO SPARK). If spark is not present at one plug, check spark plug wire resistance on suspect wire. Resistance should be less than 22,900 ohms per 3.28 feet. Replace spark plug wire and spark plug as necessary.