Brad's Car Manuals: A 3rd party mirror of CHARM + LEMON car manuals
Home >> Mazda >> 1999 >> B2500 TL, Automatic >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - Basic Diagnostic Procedures >> Ignition Checks >> Crankshaft Position Sensor Resistance

Crankshaft Position Sensor Resistance

Download the full database via torrent (~1.1 TB)  |  Download Brad's custom LEMON patches

Disconnect crankshaft position sensor connector. Using ohmmeter, measure resistance between terminals "A" and "B". See Fig 1. Resistance should be as specified. See CRANKSHAFT POSITION SENSOR RESISTANCE  table. If resistance is not as specified, replace crankshaft position sensor.

CRANKSHAFT POSITION SENSOR RESISTANCE

Application Ohms @ 68°F (20°C)
Miata (1)
Millenia
2.3L 950-1250
2.5L 520-580
Protege 500-600
626 520-580
(1) Information is not available from manufacturer.
Fig 1: Checking Crankshaft Position Sensor Resistance (Typical)
G96B11404Courtesy of MAZDA MOTORS CORP.