EGR Monitor Repair Verification Drive Cycle

Download the full database via torrent (~1.1 TB) | Download Brad's custom LEMON patches

Connect scan tool. Warm engine until ECT PID is at least 163°F (73°C). Turn all accessories off. Drive vehicle at more than 48 MPH for at least 2 minutes. Stop vehicle and allow to idle for 20 seconds. Using scan tool, check drive mode completion status. If test is not complete, turn ignition off. Repeat test. If test is complete, check test results. If results are okay, ensure no DTCs are present. If results are not okay, repairs are not complete.