Brad's Car Manuals: A 3rd party mirror of CHARM + LEMON car manuals
Home >> Mazda >> 2000 >> MPV DX >> Repair and Diagnosis >> External Pages >> Different car >> Section 171 (Lighting System) >> Flasher Control Module Inspection >> Notes

Flasher Control Module Inspection: Notes

Download the full database via torrent (~1.1 TB)  |  Download Brad's custom LEMON patches
WARNING: This page is about a different car, the 2004 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.
  1. Connect the connector to the flasher control module.
  2. Connect the negative battery cable.
  3. Measure the voltage at the flasher control module using a voltmeter.
    • When inspecting terminal F for continuity, disconnect the flasher control module connector.
  4. If the value are not as specified in the Terminal Voltage List (Reference), inspect the parts under "Action" and related wiring harnesses.
  5. If the system does not work properly even though the parts or related wiring harnesses do not have any malfunction, replace the flasher control module.