Brad's Car Manuals: A 3rd party mirror of CHARM + LEMON car manuals
Home >> Mazda >> 2001 >> MPV DX V6-2.5L DOHC >> Repair and Diagnosis >> Body and Frame >> Locks >> Keyless Entry >> Keyless Entry Module >> Service and Repair >> Removal and Installation

Removal and Installation

Download the full database via torrent (~1.1 TB)  |  Download Brad's custom LEMON patches
KEYLESS CONTROL MODULE REMOVAL/INSTALLATION

1. Disconnect the negative battery cable.
2. Remove the driver-side rear side trim.




3. Remove in the order indicated below.
1. Keyless control module connector
2. Bolt
3. Keyless control module

4. Install in the reverse order of removal.