Brad's Car Manuals: A 3rd party mirror of CHARM + LEMON car manuals
Home >> Mazda >> 2001 >> MPV DX V6-2.5L DOHC >> Repair and Diagnosis >> Body and Frame >> Locks >> Power Locks >> Power Door Lock Control Module >> Testing and Inspection

Power Door Lock Control Module: Testing and Inspection

Download the full database via torrent (~1.1 TB)  |  Download Brad's custom LEMON patches
DOOR LOCK CONTROL MODULE INSPECTION

1. Measure the voltage at the door lock control module terminals as indicated below.
2. Disconnect the door lock control module connector before inspecting for continuity at terminals F, H, M, and N.
- If not as specified, inspect the parts listed under "Action."
- If the parts and wiring harnesses are okay but the system still does not work properly, replace the door lock control module.

Terminal Pinouts:




Terminal A - D:




Terminal F - N:




Terminal Voltage Table (Reference)