Diagnostic Tests: Notes

Download the full database via torrent (~1.1 TB) | Download Brad's custom LEMON patches

CAUTION: Ensure ignition is off before disconnecting harness connector from any component or control module.

NOTE: If Powertrain Control Module (PCM) replacement is instructed in following testing, always ensure PCM connectors and ground circuits are okay. If either are suspect, repair and repeat testing to confirm PCM malfunction.

NOTE: Check connectors within a suspect circuit for loose connection, loose female terminals, terminals pushed out of their connectors, water or terminal corrosion.

NOTE: Self-diagnostic test procedures are for use with New Generation Star (NGS) scan tool. If a generic scan tool is used, ensure scan tool is certified to OBD-II standard.