Brad's Car Manuals: A 3rd party mirror of CHARM + LEMON car manuals
Home >> Mazda >> 2002 >> B2300 Automatic >> Repair and Diagnosis >> Brakes >> Anti-Lock/Traction Control System >> Front Speed Sensor (4X2) Removal/Installation

Front Speed Sensor (4X2) Removal/Installation

Download the full database via torrent (~1.1 TB)  |  Download Brad's custom LEMON patches
  1. Raise and support the vehicle.
  2. Disconnect the speed sensor electrical connector and unclip the front speed sensor wire from the vehicle frame.
  3. Remove the bolt and speed sensor.
  4. Install in reverse order of removal.
    1. Tightening Torque 
      1. 11-13 N.m (1.1-1.3 kgf.m, 9-10 ft.lbf) 
    Fig 1: Removing/Installing Front Speed Sensor (4x2)
    G01166922Courtesy of MAZDA MOTORS CORP.