Brad's Car Manuals: A 3rd party mirror of CHARM + LEMON car manuals
Home >> Mazda >> 2002 >> MPV ES >> Repair and Diagnosis (Single Page) >> Body & Frame >> Exterior/Interior Trim >> Sliding Door >> Easy Closure Control Module Removal/Installation >> Easy Closure Control Module Inspection

Easy Closure Control Module Inspection

Download the full database via torrent (~1.1 TB)  |  Download Brad's custom LEMON patches
  1. Remove the easy closure control module.
  2. Inspect for continuity between the latch position switch terminals using an ohmmeter.
    • If not as specified, replace the easy closure control module.
Fig 1: Inspecting Easy Closure Control Module Continuity
G01196321Courtesy of MAZDA MOTORS CORP.
Fig 2: Identifying Easy Closure Control Module Connector
G01196322Courtesy of MAZDA MOTORS CORP.
scientia non olet · About Brad's Car Manuals