Brad's Car Manuals: A 3rd party mirror of CHARM + LEMON car manuals
Home >> Mazda >> 2002 >> MPV ES >> Repair and Diagnosis (Single Page) >> Body & Frame >> Exterior/Interior Trim >> Sliding Door >> Easy Closure Control Module Removal/Installation >> Notes

Easy Closure Control Module Removal/Installation: Notes

Download the full database via torrent (~1.1 TB)  |  Download Brad's custom LEMON patches
  1. Disconnect the negative battery cable.
  2. Remove the sliding door trim.
  3. Remove the screws, and remove the easy closure control module.
  4. Disconnect the easy closure control module connector.
  5. Install in the reverse order of removal.
    Fig 1: Removing Easy Closure Control Module
    G01196320Courtesy of MAZDA MOTORS CORP.