Brad's Car Manuals: A 3rd party mirror of CHARM + LEMON car manuals
Home >> Mazda >> 2003 >> Protege ES, Automatic >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transaxle Shift Mechanism >> Selector Lever Disassembly/Assembly >> Cam Assembly Note

Cam Assembly Note

Download the full database via torrent (~1.1 TB)  |  Download Brad's custom LEMON patches
  1. Loosely install the cam to the push rod.
    NOTE:
    • Clearance can be reduced by turning the cam clockwise.
  2. Adjust the clearance between the guide plate and the guide pin by turning the cam.
  3. Install the selector lever knob and verify that the clearance is as specified.
    • If not, repeat from Step  2 .
  4. Remove the selector lever knob.
    Fig 1: Measuring Clearance
    G01914545Courtesy of MAZDA MOTORS CORP.
  5. Apply grease to the cam as shown.
    Fig 2: Applying Grease To Cam
    G01914546Courtesy of MAZDA MOTORS CORP.
scientia non olet · About Brad's Car Manuals