Continuity Inspection

Download the full database via torrent (~1.1 TB) | Download Brad's custom LEMON patches

Disconnect the negative battery cable.
Disconnect the fuel pump unit connector.
Inspect for continuity between the following fuel pump unit terminals.
Except for California emission regulation applicable model
- A and E
For California emission regulation applicable model
- A and B
- If there is continuity, perform the "Circuit Open/Short Inspection".
- If there is no continuity, replace the fuel pump.
  
  Fig 1: Identifying Fuel Pump Unit Connector Terminals
  Courtesy of MAZDA MOTORS CORP.