Brad's Car Manuals: A 3rd party mirror of CHARM + LEMON car manuals
Home >> Mazda >> 2004 >> B2300 Base, Automatic >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System >> Throttle Position (TP) Sensor Removal/Installation - 4.0L >> Removal and Installation

Removal and Installation

Download the full database via torrent (~1.1 TB)  |  Download Brad's custom LEMON patches
Fig 1: Removing Accelerator Control Snow Shield - 4.0L
G01937903Courtesy of MAZDA MOTORS CORP.
  1. Remove the accelerator control snow shield.
    Fig 2: Removing Throttle Position (TP) Sensor - 4.0L
    G01937904Courtesy of MAZDA MOTORS CORP.
  2. Remove the throttle position (TP) sensor.
    1. Disconnect the electrical connector.
    2. Remove the bolts and the TP sensor.
  3. To install, reverse the removal procedure.
scientia non olet · About Brad's Car Manuals