Brad's Car Manuals: A 3rd party mirror of CHARM + LEMON car manuals
Home >> Mazda >> 2004 >> RX-8 1.3 3 >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Barometric Pressure (BARO) Sensor Removal/Installation

Barometric Pressure (BARO) Sensor Removal/Installation

Download the full database via torrent (~1.1 TB)  |  Download Brad's custom LEMON patches
  1. Disconnect the BARO sensor connector.
  2. Remove the BARO sensor installation bolt and remove the BARO sensor.
  3. Install in the reverse order of removal.

    BARO sensor tightening torque 

    1. 7.8-10.8 N.m {80-110 kgf.cm, 69-95 in.lbf} 
    Fig 1: Identifying Barometric Pressure Sensor
    G03702092Courtesy of MAZDA MOTORS CORP.
scientia non olet · About Brad's Car Manuals