Power Window Subswitch

Download the full database via torrent (~1.1 TB) | Download Brad's custom LEMON patches

POWER WINDOW SUBSWITCH INSPECTION

1. Verify continuity as indicated in the table.
- If not as indicated in the table, replace the power window subswitch.

2. Connect battery positive voltage to terminal E and ground to the terminal A. Verify that continuity exists.
- If not as specified, replace the power window subswitch.

3. Connect battery positive voltage to terminal E and ground to the terminal B. Verify that continuity exists.
- If not as specified, replace the power window subswitch.